The Meseta de Somuncura is a broad plateau capped by basalt. Near its western edge is evidence of multiple volcanic events and a complex erosion history. Most notable are the long, narrow, and winding lava flows that run across most of the right side of the image. These formed from low-viscosity lava that flowed down gullies over fairly flat terrain. Later, erosion of the landscape continued, and the solidified flows were more resistant than the older surrounding rocks. Consequently, the flows became the ridges we see here. This natural process of converting gullies to ridges is called topographic inversion.Other features seen here include numerous and varied closed depressions. The regional drainage is not well integrated, but instead the drainage ends up in salty lakes (dark water, some with bright shores). Wind streaks indicate that winds blow toward the east (right) and blow salt grains off the lake beds when dry. The bowtie pattern in the upper left has resulted from differing grazing practices among fenced fields.This anaglyph was generated by first draping a Landsat Thematic Mapper image over a topographic map from the Shuttle Radar Topography Mission, then producing the two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and the right eye with a blue filter.Landsat satellites have provided visible light and infrared images of the Earth continuously since 1972. SRTM topographic data match the 30-meter (99-foot) spatial resolution of most Landsat images and provide a valuable complement for studying the historic and growing Landsat data archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota.Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.Size: 21.5 kilometers (13.4 miles) x 27.2 kilometers (16.9 miles) <br/> Location: 41.6 deg. South lat., 67.9 deg. West lon. <br/> Orientation: North toward upper left <br/> Image Data: Landsat band 7 (short infrared) <br/> Date Acquired: February 19, 2000 (SRTM), January 22, 2000 (Landsat) Sensor: Space Shuttle/SRTM. Data Start Date: 2/19/00.

plus-circle Add Review

comment

Reviews